Mercedes Miracle Paint Underbody Complete Sheetmetal Rust Repair Kit with Extras

NEW and improved HD formula. This new formula has a thicker viscosity for easier application on vertical surfaces and when using fiberglass cloth.

PLEASE NOTE: This kit contains liquids that can only be shipped by UPS ground. Due to this requirement we can only ship to the continental lower 48 States Sorry for this inconvenience.

In my 40 plus years of working on old cars I have not found any paint you can put over rust that will give you any kind of lasting results. But I have discovered MIRACLE PAINT This is an amazing product and it continually amazes me as I find new ways to use it. It is not a paint, but a rock hard coating that adheres vigorously to rust. And the rust does not come back! When combined with fiberglass cloth it can strengthen weak metal and repair rusted out holes in the sheet metal.

Works on all models 110, 111, 112, 113, 108, 109, 114, 115, 107, 116, 123, 124, 126, and 201 chassis. The majority of older Mercedes have some rust somewhere in one form or another. It may only be surface rust now, but if left alone that surface rust can lead to rust holes which can further lead to some expensive repairs.

I have put together a  kit of basic items you will need to complete minor NON-STRUCTURAL rust repairs on your Benz. Works great for trunk and floor rust, rust under the fender wells, chassis surface rust, and anywhere is a non structural area where the rust has created small holes. Included are

• Quart Miracle Paint rust coating
• Square foot of fiberglass cloth (flexible)
• Square foot of fiberglass mesh (stiff)
• Brushes (4)
• Protective gloves (3 sets)
• Spray can black chip guard (best quality)
• Introduction to Rust Repair Manual

The textured spray chip guard is the best product I have found the spray over the rust repaired area for both cosmetics and further protection. My manual includes both pictures and detailed descriptions on how to properly apply the products for lasting results.

Do not neglect rust. If you let the rust persist it can cause major problems. Check out my website under ALERTS to see what can happen if you ignore rust on your car. Rust never sleeps. Act now or be sorry. Also you might consider buying my advanced manual (70 pages if you do not already have it).

To see all our rust repair products CLICK HERE.

Here is the repair sequence of one of the more common rust repairs that this kit excells at - rust in the wheel wells. In fact, doing the repair this way is better than trying to weld in new sheel metal.  Have you ever witnessed how rapidly welded steel can rust? If you can not get to the back side of a new weld to treat it will a product like miracle paint it will rust out again from the backside in 4 to 8 years if it is exposed to moisure.

Here is a typical rust spot that you might find in a wheel well area. Does't look to bad does it... just remember what you see is always the tip of the rustberg.... This is n example of why I detest body undercoating.  It allows moisture to get trapped in behind the coating and actually accelerates the rust out.

When you start scraping away the undercoating and flaking metal, the hole will always be worse than what you first expected.

Once the damaged metal has been fully exposed you can continue scraping and rough sanding the surrounding metal to an area at least 1 to 2 inched past the weak metal.

Coat the area inside the hole thoroughly with Miracle Paint to prevent further rusting, then make a patch of 3 layers of fiberglass mat soaked in Miracle Paint and apply it over the rust hole. When dry overnight you will not believe how strong this repair. Even banging on it will make you think you are banding on sheet metal. It dries as hard as epoxy but will not let loose from the rust like epoxy or polyester resin. It really is a miracle!

When the Miracle Paint is dry you can skim coat it will a water proof filler, sand the area and then spray it with our high quality chip guard (do not use typical auto body undercoating. Massage it a little and you can even make it look old and original. Complete details on how to do this are included in my advanced manual on Premanent Rust Repair without Welding.

On another note this product works great on repairing holes in mufflers and rear exhaust pipes.  Just try to find ANY other product that can do that and have it last.  I have done repairs on mufflers that have outlasted the life of the muffler itself!