If you have been around SVO fuel operations for any length of time you know how frustrating it can be to try to get air out of the fuel system right after a SVO filter change. It does not work very well to just use the factory hand primer pump as that is trying to suck fuel through the filter. To bleed the system fast you need something that can PUSH the heavy fuel through the filter instead. Ideally, that should be an electric boost pump mounted at the rear of the car, but if you are not ready to spring for such a pump, a good inexpensive alternative is to use a rubber bulb hand pump.
This pump has nipples on each end for 5/16 inch or 8 mm fuel hose. It also has a built in check valve which limits flow in one direction and will hold pressure. (Be sure to install with arrow pointing in correction direction). Kit comes with 3 feet of 5/16 fuel hose and two quality German hose clamps. Pump must be mounted between fuel tank and SVO filter in location you can get to easily (either trunk or engine compartment).
