Catalog » New Parts Kits and Manuals » SV0/WVO parts » Diesel Engine » Biodiesel » New Repair Kits Released in Past 60 Days

Biodiesel SVO Specification 3/8 Super Fuel Hose - PER FOOT New Arrival!

Item: BIO-COM38BF
Price: $2.50
Listed In Categories
Super flex hose 3/8 by the foot

Now you can buy it in any length you want! Order here by the foot. This is the super fuel hose we have been waiting for! Finally a hose that meats all the needs for running, gasoline, ethonol, diesel, biodiesel, and heated SVO in less than ideal environments. There is nothing else like it on the market today.

  • Meets ASTM D 6751 biodiesel requirements up to B100
  • Reinforced and braided for super tear resistance
  • Abrasion and weather resistant Hypalon cover to protect from external abuse
  • Thermoplastic barrier to prevent hydrocarbons from escaping through hose
  • Super flexible to prevent kinks in tight bends
  • High temp rating to 257 degrees F.


You show me a hose that can out perform this Super-Flex FL hose in all these categories and I will eat it!

This 3/8 ID fuel hose can be used for a number of different bio-mass fuel applications when build your own system or installing a conversion that does not have bio-diesel grade hose. Determine the length or lengths of hose you need and purchase this hose by the foot here. Just change the quantity in your shopping cart indicate how many feet you want.

Some think or may have heard that Viton is the only game in town. I believe Super Flex FL is a better all around hose. I prefer to use tough internally braided hoses over Viton because they can take more abuse under the car and in the engine compartment. This special hose made by Parker has a thin internal sheath that prevents any permeation of fuel or fuel vapor into the rubber part of the hose . This hose is IT!

We also sell it by the 20 FOOT ROLL.

Check out our VITON special injector return hose for biodiesel applications.

WARNING: If you are using this hose to build your own alternative fuel system do not use barbed fittings. CLICK HERE to order the proper non-barbed fittings for this hose. Order the proper fittings to go with this fuel hoseOrder the proper fittings to go with this fuel hose

You will also want to make sure to use the problem hose clamps with this hose to get the proper air tight seal to prevent long term damage. DO NOT USE CHEAP HOSE CLAMPS that you get at most hardware and auto parts stores!. Our hose clamps are made in Germany. They are high torque without distortion, they are smooth on the inside so they don't cut into the hose sheath, they don't rust, and they distribute the pressure more evenly so you can get the hose off the non barbed fitting with less effort. These really are Super Hose Clamps. CLICK HERE to order.

Use the proper hose clamps for this hose!Use the proper hose clamps for this hose!

 

  • 446 reads