Used Parts 126 Chassis

Good used crack free window washer fluid type (single pump motor). Fits all 126 300SD 1981 to 1984 with single pump.  Pump motor runs.

Fits all 5 cylinder turbo diesels from 1978 to 1985. Believe it or not these do go bad! If you live in the rust belt (ie salted roads) the lower alternator mounting bolt can actually seize in this bracket. When that happens the only way you will be able to remove your alternator is by cutting the bolt with a saws all and metal blade. Then you will need a replacement bracket like this.

Good used set of original wiper arms. Fit all 126 chassis sedans from 1981 to 1991. They often wear out at the base and get sloppy (that is what can make the clanking noise). These have good joints and springs

Good used lower seat frame with motors and plugins. All motors are working. Fits all 300SD 1981 to 1985. This is for drivers seat only. If you need right side please email us.

Fits 126 sedans 1981 to 1983 and 123 sedans and couples 1982 to 1985. This is a good working electric sunroof motor and housing. NO gears or clutch assemby parts are included. Unit also fits early 201 190E and 190D 1984 to 1986.

Good working used rear brake calipers (right and left side). Hardware and old pads included, but recommend new pads. Brake lines have been cut. Fit all 116, 123, and 126 chassis Mercedes from 1973 to 1991.

Fits 126 sedans 1981 to 1983 and 123 sedans and couples 1982 to 1985. This is a good working motor and transmssion with good gears and a with strong clutch. Disassembled, inspected, cleaned and greased. Does not come with bracket or red clutch lock nut. You can use those from your current failed unit. Unit also fits early 201 190E and 190D 1984 to 1986.

Twin belt alternator pulley in good used condition. If yours is bent this is an opportunity to get a replacement for a resonable price. I only have one of these available. Fits all 5 cylinder turbo models 300D 300CD 300TD and 300SD from 1978 to 1985.

Good used filter assembly and all lines as shown. Note: The rubber cigar hose may or may not be the right length depening on your chassis. So even though included it may not work. All the plastic hard lines are the same and in good condtioin. Fits 1978 to 1985 300SD and 1977 to 1985 300D, 300TD and 300CD.

Note: If you have a pesky leak at the fitler it may be due to a deformed housing or damaged fittings.

Includes sunroof drive motor and geared cable drive transmission as shown. These fit 1977 to 1979 240D 300D and 300CD with power sunroof. The motor is strong and all gears and good inside the drive transmission.

Good used tested EGR valve. Last one I have. Failure of this unit can cause excess smoke, poor idle, and/or rough shifting. Check to see if yours holds vacuum. Easy to replace. Also consider ordering new vacuum sensor switch. Also fits 1980 to 1983 240D with EGR valve.

This is a part that commonly breaks on 617 turbo diesels. If your alternator is rattling be sure to check for failure of this plate. Fits 1981 to 1985 123 and 126 5 cylinder turbo diesel engines.

I have three or four 617 turbo charger assemblies that have been sitting around my shop for a number of years. These were removed from tired engines or wrecked cars. I can not confirm the actual condition of each so I have decided to sell them cheap for the value of a rebuildable core. Maybe you would like to rebuild one while still driving your turbo diesel? Or who knows, maybe the one I send you works just fine. And I know a couple of them probably would.... BUT for this price No guarantees - no returns.

The turbos DO NOT come with intake manifold or EGR valve.

This relay provides the delay function on your wiper motor. If your wipers are not working in the first postition on you switch it may mean this relay is bad. It is located behind your instrument cluster up close to the firewall on all 123 chassis. On 126 300SD and 380SE it is located inside the fuse box. Good used working relay. Even if yours is not bad you might want to pick this up for a spare when you need it!

Good used set of 5 intake valves and 5 exhaust valves for all 5 cylinder turbo diesels from 1978 to 1985. Comes with vavle springs, valve spring caps, and adjusting nuts as shown. Will need to be resurfaced before installation of course.

Good used palomino center armrest with good locking mechanism. Fits 126 sedans 1981 to 1985. No tears or cracks in the leather, but there is some fading in the color. Would need to be recolored to be perfect.

Excellent used navy MB tex vinyl center armrest with good locking mechanism. Fits Late model 123 chassis and 126 sedans 1981 to 1985. No tears or cracks in the vinyl.

Good used 5 cylinder turbo diesel flywheel. Fits all 1978 to 1985 turbo models. Come with good flex plate and flywheel mounting bolts.

Fits 116 123 126 4 and 5 cylinder non turbo and turbo engines 1977 to 1985. Good used set of five special factory stretch bolts that hold the rocker arm towers to the cylinder head. Common damaged item and hard to find new. The 5 bolts here will work with 5 cylinder engines. If you have a 4 cylinder you will just end up with one extra bolt.

Complete used grill assembly with hood star as shown. Chrome frame only has one very small dent in it on drivers side. You can see it in picture. Fits all 126 chassis 300SD and other 126 sedans from 1981 to 1985. Also fits all later model 126 sedans from 1986 to 1991.