123, Diesel Engine

We offer these for only $2.00 with any order of other items totaling more than $25.00 (excluding shipping). Please do not add to cart unless you order meets these requirements. LIMIT ONE PER CUSTOMER AT THIS PRICE. These are the zip ties we have all been looking for. They have a super sticky tape of the foot of the tie so you can stick them anywhere in your engine compartment without having to drill a hole in the inner fender panel. (NOTE: Be sure to thoroughly clean the surface BEFORE installing). The other neat thing is that these zip ties can be loosened back up (just like the factory type) to remove the wire bundle or anything else you need to secure. Sold in packs of 6. You will love these!

You have asked for it and we have delivered again. Now that all those old power steering pumps are leaking out the front seal we have come up with a kit that will allow you to replace the front seal of your pump at home without any special tools. This kit will work on all power steering pumps on 4 and 5 cylinder diesel engines from 1977 to 1985 (excluding the 190D 2.2).

Kit contains the following:

This is the tool I love to use when troubleshooting engine operating temperature problems. You can stand back and aim the beam right on a spot on the radiator or engine to get an exact temperature reading. This can indicate whether or not your radiator is plugged and confirm if your temperature gauge is accurate or not.

If you are running SVO it can give you accurate readings of the temperature of your oil - both during filtering and coming out of your boost heater.

Features:

Set of FIVE Rebuilt Bosch Fuel Injector Housings with high performance Monark Nozzles installed. Each injector has been bench tested and pressure balanced in our shop. All injectors are set to release pressures between 1900 and 1950 psi. This set of injectors will work in all 300SD 1978 to 1985 and all 123 300D 300CD and 300TD with turbo diesel engines.

Injectors will be shipped with new heat shield washers as shown. No instructions included.

NO CORE CHARGE / NO CORE RETURN

Set of FIVE Rebuilt Bosch Fuel Injector Housings with high performance Monark Nozzles installed. Each injector has been bench tested and pressure balanced in our shop. All injectors are set to release pressures between 1600 and 1650 psi. This set of injectors will work in all 300D 300CD from 1975 to 1981 and all 300TD from 1978 to 1980, NON Turbo.

Injectors will be shipped with new heat shield washers as shown. No instructions included.

NO CORE CHARGE / NO CORE RETURN

Set of four Rebuilt Bosch Fuel Injector Housings with high performance Monark Nozzles installed. Each injector and been bench tested and pressure balanced in our shop. All injectors are set to release pressures between 1600 and 1650 psi. This set of injectors will work in all 220D and 240D from 1969 to 1983 as well as 190D 2.2 (1984 and 1985).

Injectors will be shipped with new heat shield washers as shown. No instructions included.

NO CORE CHARGE / NO CORE RETURN

High Quality (made in USA) brass two way fuel rated valve with brass fittings for 3/8 inch fuel hose. Can be used to select between two fuel tanks or as a control valve for your loop or return fuel with running on SVO. Comes with two straight non-barbed hose fittings and one 90 degree fitting. This will allow max flexibility in how you route your fuel hoses. NO instructions included.

High Quality (made in USA) brass two way fuel rated valve with brass fittings for 8 mm or 5/16 inch fuel hose. Can be used to select between two fuel tanks or as a control valve for your loop or return fuel with running on SVO. Comes with two straight non-barbed hose fittings and one 90 degree fitting. This will allow max flexibility in how you route your fuel hoses. NO instructions included.

NEW LOCTITE PRODUCT - AUGUST PROMO! If you have read very many of my manuals and instructions you already know how much I detest Silicone Gasket Sealant. I know there are places for silicone (ie bath tub caulking, etc), but it should not be used on internal combustion engines!

These rubber end plugs can be used to cap off your vacuum on the end of a line or on certain components. FOR USE ON VACUUM SYSTEM ONLY. These are NOT to be used on fuel injectors.

CLICK HERE to view the Vacuum Connector Service Kit.

When was the last time you knocked one of your vacuum lines off around the oil filter housing, only to discover when you tried to reattached it that the fittings were swollen and would just not stay connected? This is a L shaped fitting that fits 115, 116, 123, and 126 chassis.

CLICK HERE to view the Vacuum Connector Service Kit.

When was the last time you knocked one of your vacuum lines off around the oil filter housing, only to discover when you tried to reattached it that the fittings or hose were swollen and would just not stay connected? Here is some extra vacuum hose to fix your problem. Fits 115, 116, 123, and 126 chassis.

ONE meter cut piece.

CLICK HERE to view the Vacuum Connector Service Kit.

When was the last time you knocked one of your vacuum lines off around the oil filter housing, only to discover when you tried to reattached it that the fittings were swollen and would just not stay connected? This is a Y shaped fitting that fits 115, 116, 123, and 126 chassis.

CLICK HERE to view the Vacuum Connector Service Kit.

When was the last time you knocked one of your vacuum lines off around the oil filter housing, only to discover when you tried to reattached it that the fittings were swollen and would just not stay connected? This is a U shaped fitting that fits 115, 116, 123, and 126 chassis.

CLICK HERE to view the Vacuum Connector Service Kit.

This is the diesel copper ring for your oil pan plug. Fits all 5 cylinder diesel engines from 1978 to 1985 including the 300SD 300D 300CD and 300TD.

 

This is the Narrow style oil filler gasket. Fits all 5 cylinder diesel engines from 1978 to 1985 including the 300SD 300D 300CD and 300TD. No instructions included.

This is the wide style oil filler gasket. Fits all 5 cylinder diesel engines from 1978 to 1985 including the 300SD 300D 300CD and 300TD. No instructions included.

This oiler pipe gasket is for turbo diesels only. Fits all 5 cylinder turbo diesel engines from 1978 to 1985 including the 300SD 300D 300CD and 300TD.

This is a brand new egr gasket. Fits all 5 cylinder turbo diesel engines ONLY from 1978 to 1985 including the 300SD 300D 300CD and 300TD.

This is a brand new thermostat housing gasket. Fits all 5 cylinder diesel engines from 1978 to 1985 including the 300SD 300D 300CD and 300TD.

This is the gasket that goes in the power steering reservoir cap. Fits all 5 cylinder diesel engines from 1978 to 1985 including the 300SD 300D 300CD and 300TD.

This new vacuum pump gasket fits all 5 cylinder diesel engines from 1978 to 1985 including the 300SD 300D 300CD and 300TD.

This new water pump housing gasket fits all 5 cylinder diesel engines from 1978 to 1985 including the 300SD 300D 300CD and 300TD.

This part allows you to properly adjust the belt tension on all 617 5 cylinder turbo diesel engines. It is common for the plastic block to break apart. When that happens you adjusting bolt will just spin without any affect on the belt tension. We only have a few of these available used.

This chain tensioner gasket is brand new and is fits all 5 cylinder diesel engines from 1978 to 1985 including the 300SD 300D 300CD and 300TD.

This is a brand new oil filter pressure plate gasket. Fits all 5 cylinder diesel engines from 1978 to 1985 including the 300SD 300D 300CD and 300TD.

This size freeze plug fits almost all gas and diesel engines from the early 70s up into the 90s. This includes all 61x and 60x diesel engines, the 103 gas engine in the 190E, 300SE and 300E. It also fits many V8 engines but you should measure your current plug to be sure. This part measures 34 mm in diameter.

We are seeing more freeze plugs rust out from the inside as these engines age. First sign will be a little rust ring around the outside edge of the plug, next sign will be slight coolant loss, and last sign may be catasropic engine over heat. Check your freeze plugs for any sign of deterioration NOW.

Complete R134a retrofit kit as shown to convert your A/C system.  Keep in mind this may not repair all problems with your current A/C system. This kit is designed to go into a good working system. There maybe other parts you will want to purchase such as receiver dryer, etc while doing this conversion. Consult with your local A/C specialist if you are unfamiliar with air conditoning systems.

PLEASE NOTE: We are supplying this inexpensive kit as a convenience to our customers. It will not come with detailed instructions nor do we offer support on how to convert your current system. That will be between you and your local A/C specialist.  

New German high quality Factory type engine oil filter. This is for one (1) filter in the box. Includes oil filter housing cap o-ring and oil pan bolt sealing washer. Does not include instructions. Fits all 123, 116 and 126 4 and 5 cylinder diesels to 1985.

New German Factory type spin-on fuel filter. This is for one (1) filter in the box. Does not include instructions or sealing ring and o-ring for center bolt. (If you need these extras please see our other filter kits). Fits all 123, 116 and 126 4 and 5 cylinder diesels to 1985.