Kent's Factory Service Manuals collection is going on sale now. CLICK HERE.
Here is my all-time favorite gasket maker and sealant. You may already know how I feel about RTV silicone products (I think they should be outlawed!). We have had a number of our customers ask us where to get this so we decided to offer it on our website.
To many people, automotive electrical systems and testing are a big mystery. It is not as complicated as you might think.
In this video, Kent will show you how he fixed his leaking tires on his chrome alloy wheels by using Miracle Paint. This is a full 22-minute step-by-step instructional video. Watch the video "trailer" below to give you a better understanding of what is involved in this procedure.
This kit was developed by Kent primarily to fix leaking chrome wheels. The free on-demand video that comes with this kit shows the detailed process of cleaning and filling the corroded areas along the edges of the inside of the wheel to seal them and stop annoying tire leaks.
Do not let anyone convince you to install some super platinum, iridium or kryptonite spark plug in your old Benz. They are just not capable of handling the richer fuel mixtures associated with these older engines.
In this 19 minute instructional video, Kent takes an old 1970 280SE engine in the back of his shop and pulls the harmonic balancer off the front of the engine, removes the old seal, uses his custom-built puller to remove to seal race, and then shows you how to use the tools in his seal replacemen
When changing the front crank seal on your older 6 cylinder Mercedes you may or may not need to replace the sealing race that goes on over the front of the crankshaft.
This video will show you how to remove the front crank seal race using the factory tool and using Kent's custom puller. It will also demonstrate a very easy way to install a new replacement race before installing a new seal.
See the related products below to purchase individual seals with tools and Kent's video instrucitions.
Very Rare. One of the first of these types of manuals released. This introduction manual is intended to familiarize technical personnel with the Registration Year 1973 Passenger Cars vehicles.
Kent modified this puller and developed a procedure to remove the front crank seal race so the job could be affordable from the DIY mechanic. This costs less than half the cost of the factory tool.
Two new wing nuts. These have wider wings so they are easier to loosen and tighten. Replace the nut that most people install after the wing nut has been lost!
Wheel wrench as shown. For 17mm head bolts. Original. Only one available.
Kent will get right up behind the rear end hub plate and show you close up how to remove and replace a sway bar link. This is not a difficult job especially if you follow the sequence shown in this 7- minute video.
In this 30 minute-long video Kent will walk you through what he did for the rear suspension on his 1983 240D.
This 17-minute video will cover the removal of an old Hirschmann power antenna and then Kent will show you how to troubleshoot the wiring plug in the car to see if you are getting proper power back to the antenna. No sense in replacing a faulty antenna until you make sure your wiring is OK!
In this 28-minute instructional video Kent with show you how to do a compression test on your own Mercedes gas engine and explain how to interpret the results. It is very important you do this procedure BEFORE "throwing" parts at your engine trying to fix a performance problem.
You might be surprised to realize you spark plug holes need cleaning - and yes some REALLY need cleaning! This 5-minute video will demonstrate Kent's method of cleaning the threads in the cylinder.
This video is loaded with tips on how to properly lubricate all the key components that make your sunroof operate smoothly and properly. It is NOT a complete manual on everything related to sunroofs. It will NOT show you all the details to get the sunroof out and back in.
Emergency brake shoe maintenance is often neglected because the rear brake disc / rotor has to be removed to inspect and repair them. If the car has ever been driven a long distance with the emergency brake on, expect problems.
Clear instructions on how to remove the old boot and install a new one. Total run time:
Whether your just changing pads, hoses, or doing a complete brake system overhaul, the items we include in this DIY will guarantee the job gets done with no mistakes, minimum frustration, and lasting results. There is no other kit like this anywhere.
This is both an impressive and inspiring key chain for Mercedes owners and enthusiasts. Perfect gift item. Available in other styles. Please see the related products below. Watch the video of Kent and Kaia's road trip where they gave the first one away!
This manual is a complete guide for all brake component replacement for all 1965-1995 Mercedes Benz cars. It will help you identify common signs of trouble, inspecting brake components, and replacing major brake components - a necessity for any DIY brake job on your Mercedes Benz!
In this 22-minute instructional video, Kent will take you inside the door on a W123 240D and show you all the key points that should be lubricated and the type of lubricants you should use.
This on-demand instructional video was filmed to go with Kent's new fuel tank sending unit service kit launched in June of 2020. This is not a complete video on the subject of fuel level sending units. For the complete video see related products below.
If your fuel gauge stops working or is not reading accurately, many times it can be repaired by removing it from the fuel tank, taking it apart and giving it a good internal cleaning of the contact points, float shaft, and wires.
We have been talking about this for years. It was Ryan who got a friend to make this for us. It is a very high-quality vinyl with a special stick adhesive that "breathes" and does not allow bubbles to get trapped during application.
This is a very critical and very neglected filter located inside the fuel tank.
In this 7+ minute instructional video, you will learn how to cleanly and safely drain the fuel out of your old Benz.
This 23-minute video will demonstrate how Kent repairs some small rust spots inside the fender wells of a W116 sedan. Disclaimer: This method of repair is not recommended for large rust holes under the car or for holes that have been caused by road salt.
When the motor won't move the window down you can not get to the bolts that hold the regulator to the glass. So then how can you get it out of the door! What a pain! In this xxx minute video Kent will show you what you need to do in order to get a "stuck" power window regulator out of a door.
Fuses, supplies, and video instructions (below) to restore most older fuse boxes to better than original condition.
Fuses, supplies, tools and video instructions (below) to restore most older fuse boxes to better than original condition.
PLEASE read the instructions below carefully on how you will view this video. It is NOT downloaded to your computer and viewing is NOT automatic. You must be logged in at Mercedessource.com and you MUST click on "my account".
Hard to believe we took so long to come up with this tool. It was Gerson's genius that made it happen. The secret turned out to be the hook that keeps the tool in place while stretching out the rubber donut. Wow! What a cool tool.
Socket is now black (impact grade). This is a tool that Kent first thought about making 20 years ago. While installing shock absorbers in his 380SL he had finally had enough - so it was back to the machine shop to come up with a new tool.
Hard to believe we took so long to come up with this tool. It was Gerson's genius that made it happen. The secret turned out to be the hook that keeps the tool in place while stretching out the rubber donut. Wow! What a cool tool.
These are very high-quality brake pads and fit many different models. Brake pad paste included. Watch the video below to see why these are Kent's favorites.
If you are experiencing minor coolant loss on your older model that has the cap on the radiator, it may because you do not have the correct cap. Not all caps are created equal as Kent will point out in the video below:
This is the type of radiator that will require this cap.
Have you ever had a hard time finally a very small coolant leak? Do you find yourself adding small amounts of coolant but can not see any leak? Is there a funny smell coming from inside your Benz when you run the heater?
In this video, Kent will walk you through the steps needed to convert your older Brake Bleeder tank to one that can continue to bleed brake systems as well as pressure test radiators and cooling systems.
This was a good working unit before taken apart. All the internal parts are very usable. This will give you some repair spares for the future.
BACK IN STOCK!!! JUNE 2023
Kent has sourced 2 special Viton o-rings for the outer pump housing on these early djetronic Bosch electric fuel pumps. There are two orings that harden with age causing the pump to leak fuel at the outer end of the pump.
Many uses for this quality hard steel tool including removing W123 and early W126 motor mount bolts.
On a regular basis, Kent and Gerson custom make tools to make certain jobs go easier and faster. So is the case with this long reach ratchet. It was developed to get glow plugs out of the older diesel engines without having to remove the hard lines.
You will receive two (2) five liter bottles more than enough to do a full oil change on any vehicle:
This video will not only save the condition of your door panel, but it will save you a lot of time and frustration when you go to replace a door panel after doing maintenance inside your door. Those old plastic film liners always seem to be torn, ripped, and downright ugly.
If you own one of the early Mercedes overhead camshaft engines from the mid-1950's up to the mid-1970s that have mechanical (non-self-adjusting) lifters this is a MUST HAVE tool!