When was the last time you knocked one of your vacuum lines off around the oil fiter housing, only to discover when you tried to reattached it that the fittings were swollen and would just not stay connected? This is a + shaped fitting that fits 115, 116, 123, and 126 chassis.
Complete R134a retrofit kit as shown to convert your A/C system. Keep in mind this may not repair all problems with your current A/C system. This kit is designed to go into a good working system. There maybe other parts you will want to purchase such as receiver dryer, etc while doing this conversion. Consult with your local A/C specialist if you are unfamiliar with air conditoning systems.
PLEASE NOTE: We are supplying this inexpensive kit as a convenience to our customers. It will not come with detailed instructions nor do we offer support on how to convert your current system. That will be between you and your local A/C specialist.
5 handy bulbs to carry in your trunk for emergencies. 2 single element for turn signal, brake light or backup lights. 2 small single element for tail light running lights (correct size and watts to prevent melting plastic). 1 twin element bulb for from marker / turn signal lens.
Fits almost all models from the early 1970s to the mid 1990s
This bulb is a single element bulb that is used in the brake light, rear turn signal and your rear back up lens. It's a very universal bulb. Fits mid 60s to 90s Mercedes.
These dash light bulbs are small in size and fit a number of dash light applications behind your instrument cluster and in your center dash console.
These small frosted light bulbs are 1.2 watts and fit applications where you want a dimmer light ie, heater control knob 240D and some other center dash lights.
These bulbs are 5 watts and they fit a number of applications for instance in your instrument cluster. Check to see how many you need.
These are correct Osram small diameter bulbs for your rear tail light. Use this bulb to prevent over heating of the lens. Comes in a 6 bulbs set.
This is a set of 6 front turn signal light bulbs. Fits early 70s to mid 90s Mercedes.
Heat shrink tubing is very handing to have if you are doing any wire connections or splicing. This tubing can go over the splice or solder joint and when heat is applied from a heat gun it will shrink right down tight to the joint and protect it from shorts and corrosion.
Set of 5 High Quallity German made Monark Glow Plugs complete with a detailed manual written by Kent Bergsma. Many who own these cars complain they don't even know where the glow plugs are and are worried they could never replace them on their own. A shop will charge you a lot of money to do this job. It is time consuming but not rocket science. You have to remove the intake manifold on this engine to get the plugs replaced. My step by step illustrated manual with take you completely through the correct process. Glow plugs even come with locking nuts. These glow plugs also fit 1989 190D 2.5 (only 1989!)
To complete successfully you will need a new intake manifold gasket. CLICK HERE to order.
This is the first release from Kent Bergsmas new Advanced DIY Mechanic Series of repair manuals. This printed and wire bound guide will teach you everything you have ever wanted to know about how your pre-glow system works, how to quickly diagnose faults, how to repair and replace failed parts, how to prevent further problems, and how to upgrade a sluggish glow plug system.
The manual is printed in an 8.5 x 7 inch size and is 42 pages in length with 80 drawings, photos and illustrations. Knowing that this manual will be handled many times we have added a clear plastic front and back cover to minimize dirt and grease contamination. It is also printed on heavier 32 lb. bright white stock paper. Table of contents include:
GARAGE SALE ITEM! New H1 foglight bulb for Mid 90s mercedes, Hella number 64150.
GARAGE SALE ITEM! New Bosch Oxygen Sensor that has a universal 3 wire posi lock connector. Will work on all 103 engines.
If you are looking for an inexpensive way to test the electrical circuits on your Mercedes here is a good option. This tester reads both AC and DC voltage, DC current, resistance, and transistor, diode and battery test. Features automatic zero adjust, overange indication, and low battery indicator. Easy to read LCD readout and comes with 32 inch long test leads. Great for testing battery drains and glow plugs.
Not only does this set include almost 100 pieces but it includes metric sized allen (hex) bits and even an attachment to remove a wing nut! How cool is that? Most kits don't contain metric sizes. There are probably enough screwdriver bits in this kit to last you for a very long. Comes in nice molded red case.
This switch replacement kit will work on all 380SL and 560SL, all 126 chassis sedans and coupes 1981 to 1991 , all 123 chassis from 1982 to 1985, all 201 chassis 190E and 190D and all 124 chassis from 1986 to 1993.
New OE hot water on/off heater control valve. Easy install and is mounted close to battery. If this valve is malfunctioning you may be getting hot or cold air all the time or irrational operation of heat settings inside your car. This one has one (1) outlet at the bottom and fits all 124 chassis sedans, wagons and coupes to 1990. There is overlap of two different styles in the model year 1990. Before ordering make sure this matches the one in your 124 (one bottom outlet only).
New OE hot water on/off heater control valve. Easy install and is mounted close to battery. If this valve is malfunctioning you may be getting hot or cold air all the time or irrational operation of heat settings inside your car. This one has two (2) outlets at the bottom. There is overlap of two different styles in the model year 1990. Before ordering make sure this matches the one in your 124. Only 1993 and later model this will fit is the 1993 300D 2.5 diesel.
Most people have not had the option before of just replacing the heater motor only in their 124 chassis due to the difficulty of removing and replacing the fragile squirrel cage fans on both ends of the motor. The alternative has been a very expensive replacement Bosch unit with fans installed that lists for $298.00. Now Mercedessource offers you an alternative to the high priced replacement unit that can be installed in all 124 sedans, coupes and wagons from 1986 to 1992 for under $100!
This is the pencil style glow plug that we use in all our SVO / WVO conversion kits. The same plug is used in both our FSB sump heater and VFM engine boost heater. Good to have a spare on hand.
Also available in economical 4-pak. CLICK HERE to view.
SKU: GOC-COMPGPR
High Quality German Made MONARK Glow Plugs. Why settle for cheap when it is a lot of work just to replace the glow plugs on a 2.5 diesel. If yours are old and one goes out we recommend you replace all with this set. Sold in value pak set of five. Sorry no instructions included for this model.
SKU: DSL-124DTGP
New German Hella Relay. Good Price! Lists for $150.00.
SKU: DSL-124HGPR
New Electric Aux Fan fits 124 chassis 300E, 300CE, 300TE, 300D 2.5, 400E, E 320, E420, and E300D. We offer this at an unbelievable price! SKU: GEG-124MEAF
Brand new glow plug relay. This unit only fits 1995 E330D. If your glow plugs are not heating up properly or not coming on at all it may be your pre-glow timer. Be sure and test your glow plugs before ordering the glow relay. This part is not returnable if removed from the box.
Brand new Monark of Germany set of 6 glow plugs. Fits 1995 E300D only. These are the special long reach glow plugs. Also available to be purchased separately. We recommend that if your glow plugs are over 3 years old and you are having problems with one or more, it is best to replace all six. Sorry no instructions available for this model. SKU: DSL-12495GPS
Brand new Monark Glow plug. Fits 1995 E300D only. This is the special long reach glow plug. Also available as a set of 6. We recommend that if your glow plugs are over 3 years old and you are having problems with one or more, it is best to replace all six. Sorry no instructions available for this model. SKU: DSL-12495GP
For all 108, 109, 114, 115, 107, 116, 123, 126, 201, and 124 chassis from 1965 to 1995. I wrote this repair guide to show you how to properly remove your instrument cluster and replace worn or failing components.
From the improvements (sometimes dramatic) I have seen first hand and heard second hand (from our customers, I can confidently say this is the No.1 performance upgrade for an older Mercedes diesel. Increasing fuel pressure can increase both powrer and MPG. One of the common reasons for a diesel to produce excess smoke and deliver poor fuel economy is low fuel pressure/flow to the injection pump. This can of course be caused by dirty fuel filters but it can also be caused by a worn mechanical lift pump as well as worn components inside the injection pump itself. When fuel pressure is low it can actually delay the release timing of your fuel injectors - thus causing incomplete fuel burn - leading to excess smoke and poor mileage.
Fits the Following: All 107,116,123,201,124 and 126 Chassis from 1973-1991.
This is the contact switch that allows the interior light to come on when you open your door.
SKU:
BDP-COMDCS