201, New Parts Kits and Manuals

Brand new Rear end differential seal. Fits both gas and diesel models.

Kent has an extra stash of nice new air compressor fittings. Look closely - these are the most common type with 1/4 inch NPT fittings.  He is going to blow them out to our good customers...

Includes the following:

• One quick disconnent air compressor tool female threaded fitting
• One male connector to hose
• One female connector to hose

Only $3.00 when you purchase other items totalling $75 or more (not counting shipping charges).  PLEASE DO NOT ADD to your shopping cart unless your order qualifies. Thanks

Fits all 116 diesel 300SD, and 123 240D 300D and 300CD and all 126 chassis diesels 300SD 300SDL 350SD/L. 1977 to 1991 (Does not fit wagons!). Wiill NOT work on 107 chassis.  This is an important maintenance item that you have heard Kent talk about before. Be sure to see his video by clinking on the link below.. This screen is located in the bottom of the fuel tank and can become plugged with crud and algae and will lead to gradual power loss and eventual stalling of the engine. Many are not aware there is a filter screen in the bottom of the tank. You can change all your other filters and lines and still be perplexed as to why your engine is starving for fuel. Located just above the right rear axle shaft. But it is not easy to get out without the right tool!!

Every mercedes Owner needs a good 10mm wrench in the glove box! Very handy to have on hand, since most of the nuts under the hood are this size. 6 POINT closed end makes it easier to get off rusty bolts and nuts. Well made in the USA!!

Dirko sealing compound is permanently elastic, cold vulcanizing, silicone-rubber based. Can be used for connecting joints, cylinder head, crankcase, oil sump, timing case, thermostat, water pump, transmission, axles, differential, radiator, chassis.

General-purpose, clear RTV indoor/outdoor sealant. Seals, bonds, repairs, mends and secures glass, metal, plastics, fabric, vinyl, weather stripping and vinyl tops. Protects and repairs electrical wiring. May be applied to horizontal or vertical surfaces. Waterproof and flexible. Temperature range -75°F to 400°F (-59°C to 204°C); resists oil, water, weather, vibration, grease.Suggested Applications: Windshields, door frames, electrical connections, vinyl tops, seams and roofs, painted surfaces, ceramics, fabric.

Sil-Glyde is a silicone based brake lubricant recommended for the entire brake assembly and is compatible with rubber. It is moisture-proof and heat resistant to +600 degrees F, which means it won't burn-off like other brake noise products. Using brake lubricant is one of the keys to eliminating disc brake squeal. 4 OZ TUBE.

Double headed mallet with a hard plastic head on one side and a hard rubber one on the other. Small enough to get into tight spaces and very well balanced. This is an exceptionally high quality and well designed hammer. Made in the USA, weighs 12oz.

Designed to safely, easily remove and replace stubborn headlight adjustment or brake shoe springs. Tempered and heat-treated low carbon steel with a T-handle and 30° shaft angle near hook.

Unique wax like stick works like Loctite Hi-Tack liquid but without the mess. It is low odor and solvent free. Sets quickly to a very tacky film and seals and holds the heaviest gaskets in place. Resists gasoline, oil and common shop fluids.

Repair your damaged windshield without taking it in to a repair shop. No mixing or special tools required. Includes 1 pedestal, adhesive disk and syringe with compound. Clear repair results and easy to use.

Flange Sealant with revolutionary applicator. Unique wax like stick works like a liquid to create a flexible, solvent-resistant seal that will not tear or decay. Seals to 300 degrees and fills gaps to 0.25mm. Can be used as a form-in place gasket on a variety of metals including aluminum, iron, and flanged surfaces.

Cold Weld sets up in 15 minutes and has a test proven strength greater than 3000 psi after 16 hours. Resistant to most shop fluids including: water, diesel, fuel, gasoline, antifreeze, hydraulic fluids, motor oil, and transmission fluids. Can be drilled, filed, sanded, machined and painted. Can withstand heat to 300F/149C intermittently.

Heavy duty, temperature resistant, pertroleum-based lubricant compound fortified with graphite and metallic flake. Inert, will not evaporate or harden in extreme cold or heat.

This product is amazing. It can be used to secure all kinds of things to all kinds of surfaces. Be sure and check out Kent's video showing how he uses in on his cars as well as in and around the shop. For the self stick stuff Kent prefers the actual Velcro Brand.

This kit contains the following:

• 2 feet of Velcro Brand Standard Loop Material - Self stick back
• 2 feet of Velcro Brand Medium stick hook material - self stick back
• 5 individual black straps to secure hoses, wiring, etc. (aftermarket brand)

Kent loves these locking pliers. Nothing performs like a REAL vise grip! They are small enough to get into tight spaces and strong enough to hold anything you need in place. They are great quality and made in the USA.

We have all used adjustable wrenches, some are good but some are not so good. The most frustrating part is they loosen up by themselves and do not hold the fastener securely. Kent found this new design and is over joyed with its performance. It adjusts with a push button and locks securely in place when the button is released. It also has millimeter markings on the head so that you can set the wrench before putting it on the fastener. This is a very high quality Irwin tool.