126, Trim

IMPORTANT NOTE: We do not sell replacement antenna masts by year and model. We have run across too many problems with confusion, interchangeability, and previously swapped antennas. We sell a SMOOTH TAIL mast and a TOOTHED TAIL mast. Smooth tails were used on most of the power Hirschmann antennas up to the early 80's and tooth tails were used on the later masts. For you to order the proper one you must partially remove your current mast and inspect. Is the white plastic tail more or less smooth or does it have teeth in it? The one describe here is the TOOTHED style.

CLICK HERE to view the smooth style.

Brand new Genuine OEM silver wheel center cap. Make those wheels look beautiful again! Fits all 14 inch alloys on 107 116 114 115 123 and 126 chassis
to 1985 with the bundtcake style wheels. If you need more than one, just change your quantity in the cart!

FITS THE FOLLOWING: 108, 109, 114, 115, 107, 116, 123, and 126 (up to 1985). Fits all sedans and coupes from these chassis 1965 to 1985. Includes one Genuine OEM Mercedes front rubber seal. No instructions included.

Please note: You only need to open the  sunroof to change this seal. It can be a little tricky to get the new seal in the groove. No instructions included with this seal. It is intended for those who have already done the job. If you need instructions then I recommend you purchase our complete seal kit.

FITS THE FOLLOWING: 108, 109, 114, 115, 107, 116, 123, and 126 (up to 1985). Fits all sedans and coupes from these chassis 1965 to 1985. Includes one quality german aftermarket rear rubber seal. No instructions included.

Here is an inexpensive set of cleaning brushes that really get down in the crevices. The plastic one is good for exterior cleaning around the window and body trim. The brass is good for cleaning engine parts you don't want to scratech. The steel one is excellent if you are doing some rust repair.

Hard to find rubber shaft boots that fit right under the wiper arm. Genuine Mercedes part. these are often torn or cracked. Two per car. Fits all models 126 sedans from 1981 to 1991.

 

Are you running Vegetable oil fuel ( SVO WVO )? If so, here is an emblem you can put on your Benz that you will be proud of. High quality and one of the best looking ones I have seen. Comes with a perfect alignment guage that will let you put it right where you want it and in flawless alignment. Strong self stick 3M adhesive already applied to letter.

 

 

******************************************************

 

If you are running Biodiesel here is an emblem you can put on your Benz that you will be proud of. High quality and one of the best looking ones I have seen. Comes with a perfect alignment guage that will let you put it right where you want it and in flawless alignment. Strong self stick adhesive already applied to letter.

Custom made to order. Expect 5 to 7 days before shipped.

******************************************************

 

If you plan to do much work on your Mercedes these metric wrenches and sockets are very desireable - if not a necessity. If you have wanted to add to your tool box but not spend a lot of money here is your chance. These are not Snap On quality wrenches but if you only work on cars ocassionally these are more than adequate to get the job done. Set includes metric crows feet, metric 3/8 inch drive hex (Allen) sockets, and metric 1/4 inch drive socket set 5 to 14 mm. These items are also available separately. To see a list of all our tools CLICK HERE.

Long drive pin punches are very handy when working on your Benz. The smaller size in this set is particularly helpful when removing and replacing twin pin style brake pads. All steel. Made in India.

Not only does this set include almost 100 pieces but it includes metric sized allen (hex) bits and even an attachment to remove a wing nut! How cool is that? Most kits don't contain metric sizes. There are probably enough screwdriver bits in this kit to last you for a very long. Comes in nice molded red case.

Only one available at this price. New plastic grill insert with new chrome strips installed for you. Ready to mount on your grill shell! Fits all 126 sedans from 1981 to 1991

Fits Mercedes 126 Chassis 300SD from 1981-1985. Here is a brand new set of Mercedes OEM taillight seals. We have sourced these for you and are offering them in a set so you can replace both sides.

SKU: BDP-126MRTS 

I have looked high and low for a good set of METRIC nut driver bits that I can use in an electric drill or magnetic screw driver - and have finally found them! Yea - what a great tool for working around Mercedes - especially if you have one of the new compact and light weight Lithium-Ion Rechargeable drills. Until recently I have not used rechargeable drills much when working on cars because the ones that had enough torque were always too heavy and bulky. Now we have the high torque and light weight of these new technology drills and I am now a convert. I use these bits in my new compact drill almost every day working on all kinds of Mercedes Benz. What a great combination and I highly recommend it to anyone who works on their own cars.

We picked up a set of these trim tools about two years ago and am constantly amazed at how often I use them - so much so I decided it was time we offered them to our customers. This 5 piece set is made out of plastic so it will not mar or scratch paint, glass, chrome trim, etc. You can use these to remove upholstery clips, body side trim, door panels, soft chrome window trim, rubber seals, interior panels and consoles. You can even use the one with the round hole to pull with when you don't have anything to pry against. We will even throw in a couple sets of gloves to keep your hands clean. You will love em...

These parts fit all 126 sedans 1981-1991. These can be used if you are removing your headlight wipers from the later model 126 sedans from 1986-1991 and desire to replace them with trim pieces that do not have the holes in them.

PLEASE NOTE: This kit contains liquids that can only be shipped by UPS ground. Due to this requirement we can only ship to the continental lower 48 States Sorry for this inconvenience.

Can be successfully applied to all Mercedes Alloy (non chrome) Silver Wheels from 1970 to 1995. 108, 109, 107, 114, 115, 116, 123, 201, 126 and 124 chassis. Most of us have to admit that stained and peeling paint on Mercedes alloy wheels is ugly on any model. Your eye tends to go right to the wheels. Even if the rest of the car is nice, bad looking wheels certainly can make your car look dated.

FITS THE FOLLOWING: 108, 109, 114, 115, 107, 116, 123, and 126 (up to 1985). Fits all sedans and coupes from these chassis 1965 to 1985. If you have been reluctant to replace your aged sunroof seals because the job looked too difficult, we want you to reconsider. We have detailed illustrated step-by-step instructions on how to properly remove the roof panel and replace all four seals.

NOTE: It is possible to replace the front and side seals with out removing the metal sunroof. The roof panel must come out to replace the rear seal.

This complete kit contains the following

FITS THE FOLLOWING: All 126 chassis, sedans only. If your grill screen is in good shape but your strips are dinged and dented, then I can sell you just the chrome strips. (7) SKU: TRM-126CGS

This is an nice trunk lip trim piece for a 126 300SD. It has a few small scratches but no cracks and the clips are good. Fits all other 126 sedans from 1981 to 1991. This one is not all beat up like most and decal is still clean and intact. SKU: BDP-126TTP

Fits all 126 sedans right front door. This black coated aluminum trim part fits around the chrome door pull and often cracks and delaminates. This is an excellent used piece with no cracks or damage.

Fits all 126 sedans 1981-1991. 

FITS THE FOLLOWING: all 116 and 123 chassis. If the SIDE black plastic seat adjust handle is cracked or broken (making it hard to adjust the height of the seat) then here is an easy and clever way to fix it without having to take the seat out of the car. This handle will bolt right on to the existing metal adjusting bar. All you have to do is take a chisel and brake off all the old original handle to expose the slotted hole in the bar. Then take this new handle and bolt it right on to the existing hole without any modification or drilling. This is a very clever design and is much stronger than the original. Very easy to install.

 

SKU: INT-COMSSP

Fits all 126 sedans 300SD 380SE 1981-1985.

• Read more
• 331 reads